Skip to content

Quick Start

Ten minutes from install to a searchable collection. You'll scan a handful of cards with your phone, check them, file them in a box, and find one again.

You'll need: the app installed and signed in (First Launch), five or six cards, and a well‑lit table.

1. Scan a few cards

  1. On the Cards home screen, tap the green + next to your collection value and choose Scan.
  2. Tap Single Scan.
  3. Put a card inside the green frame and tap Capture. Repeat for each card.
  4. Tap Process N.

The Batch Summary opens and the cards are identified while short tips play. A chime sounds when it's done; tap View Batch Summary.

2. Check the matches

Each row shows your photo on the left and the card the app matched on the right.

  • A red border means no match: tap the right‑hand image and pick the card.
  • A yellow border means the printing might be wrong: tap to check.
  • No border means it's confident.

Swipe a row right to switch between foil and non‑foil if needed.

3. File them in a box

Tap Add All Cards to Collection. Type a location name such as Box 1 and tap CONFIRM. That name is now a location in your collection, and these cards are in it.

4. Find one again

Tap the magnifying glass, switch the scope to Collection, add a Card Name filter, type one of the cards and tap Search. Tap the tile, open the Collection tab, and there it is: Box 1.

What next

  • Big stacks? See Auto Scan in Adding Cards for the CSC100 feeder, and Batch scanning for numbering boxes as you go.
  • Binder pages? Grid Scan does a page at a time.
  • Build something with what you own in the Deck Builder.